Products

  1. Home
  2. Products
  3. High Speed & Fiber Optic Connectors
High Speed & Fiber Optic Connectors Filtre
Apply

High Speed & Fiber Optic Connectors

  • CFP2
    CFP2
    Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.
    More
  • CFP4
    CFP4
    Amphenol’s CFP2 (surface mount receptacle connector) is considered to be a candidate of future generation multi hundred Gbps systems. CFP2 is comprised of 104 position, 0.6 mm pitch host and pluggable connectors. It is rated for 28 Gbps per channel with resonance dampening for improved signal integrity. The plug connector on the mating interface improves accuracy and aids in achieving high speed performance. The CFP2 interconnect system includes insert molding assemblies for top side contacts and press-fit cage assemblies complying with IEEE and ITU-T applications.
    More
  • DDR4 Ultra Low Profile
    DDR4 Ultra Low Profile
    SPECIALLY DESIGNED SOCKETS FOR LOW PROFILE SYSTEM
    DDR4 Ultra Low Profile (ULP) vertical DIMM sockets provide 288 contacts on 0.85mm pitch and facilitate convenient memory expansion in servers, workstations, desktop PCs, and embedded applications in communications and industrial equipment.
    Ultra low module seating height of 1.1mm
    Lowest connector height of 13.1mm
    Reduced overall profile of the connector
    Compatible with standard DIMM module to help optimize airflow
    Low resistance contacts (registered DIMM) reduces power consumption in hardware
    More
  • eQSFP
    eQSFP
    The eQSFP interconnect system is comprised of a 38 position 0.8 mm pitch SMT connector, and a press-fit cage. With four channels of data in one pluggable, the system interface is capable of transferring data up to 28 Gbps / Channel, and replacing up to 4 standard SFP+ receptacles. These features result in greater port density and overall cost savings over traditional SFP+ products. Supporting standards include, Gigabit Ethernet, InfiniBand, and SONET/SDH with different data rate options. eQSFP includes cages in single and ganged configurations with multiple heat sink options supporting various thermal requirements and port status with light pipes options.
    More
  • ExpressPort QSFP
    ExpressPort QSFP
    The ExpressPort QSFP+/QSFP interconnect system and the stacked combos are comprised of 38-position 0.8mm pitch SMT connectors, as well as press-fit cages intended for external connections. Each port offers 4 channels which increases port density and contributes to cost savings. The ExpressPort QSFP+ E-Series connector family is rated at 28 Gbps per channel. It features as tamped and formed contact design providing improved mechanical durability, an integrated grounding structure,and resonance dampening features for superior crosstalk performance. The contact design is optimized for a smooth impedance profile resulting in improved SI performance.
    More
  • ExpressPort SFP
    ExpressPort SFP
    Amphenol’s ExpressPort SFP+ 1xN connector, when combined with the ExpressPort SFP+ cage, provides data transfer speeds of up to 25 Gbps. This is the highest speed in the market for the SFP+ series. The design of the ExpressPort SFP+ connector minimizes impedance discontinuities and reflections at high data rates, and provides a 10 to 20 dB improvement in Near-End Cross talk. The connectors accept multiple transceivers per SFF-8431 and are compliant with SFF-8081 and SFF-8083 speci- fications. Our unique ExpressPort SFP+ cage features enhanced EMI shielding options in the form of metal spring fingers or elastomeric gaskets. Ganged versions are compliant with the SFF-8433 standard. The ExpressPort SFP+ 2xN combos consist of an integrated stacked connector system and a cage with compliant press-fit pins or solder tail.
    More
  • MiniSAS
    MiniSAS
    The Mini-SAS external I/O connector system consists of a die-cast metal cage and a Compact Multi Lane SMT connector. The Mini-SAS can support Fiber Channel and Infini-Band standards, making it the perfect solution to the ever-growing demand of high-speed mass storage systems, servers, and storage area networks. Providing four serial send/receive channels per port, this connector system provides signal speeds of 6 Gbps per channel across the connector interface and is designed to satisfy the needs for gigabit serial data transmission applications. The connector satisfies the requirements of the INCITS T10 SAS 2.0 and SAS 2.1, and is also compliant with SFF-8086 and SFF-8088. The cage is mounted separately to the body so that the stress imposed by insertion and removal of the cable plug does not affect the signal/body solder joints. The connector is available with unique solder hold-down tabs designed to provide additional mechanical robustness in demanding applications.
    More
  • MiniSAS HD
    MiniSAS HD
    The Mini-SAS High Density Interconnect is the next generation SAS system, with 4x, 8x and 16x cable-plugging options to provide faster data transmission and more bandwidth for end users. Our Mini-SAS HD is designed to be compliant with the SFF-8644 standard. It is also designed to save space with its increased density and reduced size as compared to the Mini-SAS 2.0. The Mini-SAS HD connector system has a 2-row, right angle connector with 12 Gbps per channel. Each connector handles 4 lanes of data for up to 48 Gbps of total bandwidth. Ganged options are also available up to a 1x4 configuration for up to 192 Gbps of total bandwidth. This connector will mate with active copper and optical cable assemblies, as well as active pluggable modules for extended-length applications in data centers. Main applications for Mini-SAS HD include HBA Servers, storage devices, and switches in data centers.
    More
  • OSFP
    OSFP
    The OSFP interconnect system has 60 contacts per port and supports 16 high speed pairs. With a 0.6mm contact pitch, 4 rows of contacts and a horizontal port pitch of 23.38mm, the OSFP footprint is optimized for signal integrity performance. The stacked connector is enhanced for low crosstalk and has ground commoning for resonance dampening. It is also designed for 1U applications. An integrated heat sink for optimal thermal performance is a feature of the design.
    More
  • PCIe M.2 Connector
    PCIe M.2 Connector
    HIGH PERFORMANCE SMALL CARD CONNECTOR
    Amphenol ICC's PCI Express® (PCIe) M.2 occupies less board space, offers more connector height options and supports higher data rates than PCIe® Mini Card connector. This makes it an ideal option for tablets, laptops and low profile storage/server applications.
    More
  • RCx
    RCx
    RCx is a simple, high density, low cost, passive connector and cable system specifically designed for intra-rack connectivity of 25 Gb, 50 Gb and 100 Gb Ethernet allowing for a seamless intra-rack switch to adapter deployments. The streamlined design eliminates the need to include provision for active electrical components such as EEPROMs, optics, retimers, or management ICs. RCx is density optimized and can accommodate more than 128 25 G lanes in a RU faceplate. That leads two RCx2 receptables to fit on a half-height PCIe card faceplate or two Rcx4 to fit on a full-height PCIe card faceplate. Versatile, the 4-lane RCx4 receptacle can be used as a 4-lane port, or can be bifurcated to be used as multiple 2-lane and 1-lane ports.
    More
  • SFP
    SFP
    The SFP interconnect system consists of a 20-position hot swappable I/O connector enclosed in a metal cage mounted to a host PCB. It is designed to support Gigabit Ethernet and Fiber Channel applications. The connector accepts multiple transceivers per INF-8074i and combines,transmits, and receives functions in a low cost, compact and flexible format. We offer a wide variety of cage configurations, which have a two-piece construction with enhanced transceiver mating tabs available in press-fit or solder tail versions. Stacked versions ( 2XN ) consist of a 2-row cage with integrated connectors. The entire assembly in press-fit pin compliant. Main applications of the SFP series include servers, storage, switches, and networking equipment.
    More
  • UltraPort QSFP
    UltraPort QSFP
    The UltraPort QSFP+ interconnect system is comprised of a 38-position, 0.8mm pitch connector built for use in high speed serial applications. Each port offers 4 channels to increase port density which contributes to more board real estate and immense cost savings. The UltraPort QSFP+ connector supports next generation 100 G+ applications and transmits up to 32 Gbps per-serial-lane making it the fastest connector in the QSFP+ market. It features a stamped and formed contact design providing improved mechanical durability and resonance dampening features for superior performance. The design minimizes cross talk and transmission line impedance discontinuity across the connector interface at speeds up to 32 Gbps.
    More
  • UltraPort SFP
    UltraPort SFP
    The UltraPortTM SFP+ interconnect system is comprised of a 20-position hot swappable I/O connector enclosed in a metal cage mounted to a host PCB. It supports 32Gbps applications with a backward compatibility for next generation Ethernet and Fibre Channel applications. Amphenol’s UltraPortTM SFP+ connector shares the same exceptional mating interface and EMI cage dimensions as the SFP+ form factor. The cages are built for use with several board thicknesses and assembly processes to accommodate server and switch applications with great cost savings. The connector accepts multiple transceivers per INF-8081 and combines, transmits, and receives functions in a low cost, compact and flexible format. We offer a wide variety of cage configurations, which have a two-piece construction with enhanced transceiver mating tabs available in press-fit or solder tail versions. Stacked versions (2XN) consist of a 2-row cage with integrated connectors. The entire assembly is press-fit pin compliant.
    More
  • UltraPort SlimSAS
    UltraPort SlimSAS
    Amphenol’s SlimLine SAS system addresses various interconnect issues in next generation storage devices such as bulk cable form factor restrictions and the introduction of multi lane storage devices. The 8-row, 0.6 mm pitch, 24 Gbps per lane internal solution consumes the same area as the MiniSAS HD 4x solution targeted for next generation SAS-4. The proven high-speed connector and ribbon cable friendly design supports blade and mainstream server designs.
    More
  • XCede IO
    XCede IO
    The XCede IO interconnect system is comprised of a 32 position, variable pitch connector built for use in high speed serial applications. Each port offers 4 channels to increase port density which contributes to more board real estate and immense cost savings. The XCede IO connector supports next generation 100 G+ applications and transmits up to 28 Gbps per-serial-lane. It features a stamped and formed contact design providing improved mechanical durability and resonance dampening features for superior performance. The design minimizes cross talk and transmission line impedance discontinuity across the connector interface at speeds up to 28 Gbps.
    More
  • XFP
    XFP
    The XFP interconnect system is capable of a 10 Gbps data rate and is intended for external I/O connections. High speed serial interconnect applications include clusters, servers, and storage devices. Its single row cage configuration requires less space and is a lower cost alternative to parallel-optics VSR. XFP also requires less than one-third the power and physical space of an MSA interconnect with parallel interface. It has a single footprint for all links, and is hot-pluggable.
    More
  • AARC Cable Assembly
    AARC Cable Assembly
    Amphenol's harsh environment AARC plug and receptacle assemblies are available in 2-fiber or 4-fiber configurations. Based on the N-Type RF threaded connector housing, this interconnect system provides superior optical performance in outdoor environments using LC-style 1.25mm ceramic ferrules. The corrosion resistant metal housings provide a durable and environmentally protected solution for optical connectivity in areas exposed to elements such as rain, snow, dirt, and other types of contamination. Factory-terminated AARC assemblies are available in plug, receptacle, and in-line connector styles, and can be supplied as pigtails or jumpers in lengths starting from 1 meter. Factory-terminated AARC receptacle assemblies are available with flange, jam-nut, or in-line configurations. Amphenol’s AARC connectors are exceptionally suited for WiMax, LTE, 3G/4G/5G wireless, and base station applications.
    More
  • Direct Connect Solutions
    Direct Connect Solutions
    Amphenol direct connect trunk solutions offer fiber optic and/or power connectivity in a single cable, with up to 48 fiber pairs and 18 copper conductors available. A single trunk enables connectivity to several RRH’s without the need for a tower top distribution box. The direct connect hybrid trunk is the most efficient and easiest to install solution on the market. The plug and play installation system is the preferred choice of many communication equipment manufacturers and operators. A metal canister providing a secure and reliable hoisting and grounding mechanism splits power and optical cables into separate ruggedized short branches equipped with fiber optic outdoor harsh environment connectors and optional power connectors. The connection to the RRH is ensured with fiber jumpers factory terminated with RRH interface (large range available to fit most of RRH in the market) and optional power jumpers.
    More
  • IP-FX Housing
    IP-FX Housing
    The Amphenol IP-FX is a sealed, outdoor feedthru housing that is designed to provide dust and water protection for assemblies mating to outdoor enclosures and transmission equipment. The IP-FX is suitable to protect several connector types including LC Duplex, RJ45, USB, and others.

    The unique design of the IP-FX housing allows it to be supplied on factory terminated (tested cables) or field installed over existing cables such as LC Duplex or RJ45, making it an ideal solution for conversion from legacy systems to newer transmission equipment. IP-FX housing mates to equipment or enclosures that are pre-fitted with the FullAXS® -style receptacle, providing a water and dust sealed interface when mated. Applications include connection to Remote Radio Units (RRU/RRH), FTTA equipment and other outdoor systems.
    More
  • J-Connector Housing
    J-Connector Housing
    The Amphenol optical J-connector housing is designed for optical connectivity to outdoor installed electronics. Using a ‘Direct Connect’ topology, the J-Connector accepts either SFP or SFP+ pluggable transceivers, effectively transforming the passive optical assembly into an active, electrical interface. This connection method allows quick and easy replacement of the optics and allows re-configuration for upgrades.

    The field installable version can be installed over an existing outdoor simplex or duplex LC assembly for applications requiring on-site or local assembly manufacturing. The J-Connector optical bulkhead receptacle is designed to accept any MSA compliant SFP or SFP+ transceiver, providing both an IP67 grade water and dust ingress protection as well as grounding to the panel/cage for improved EMI shielding.
    More
  • PT-LC Cable Assembly
    PT-LC Cable Assembly
    Amphenol's harsh environment PT/LC plug assemblies and mating receptacles leverage the proven MIL-DTL-26482 spec connector system to provide an environmental seal and mechanical protection for 2 fiber duplex LC style connections. Available with either a quick-mate bayonet or anti-vibration threaded coupling, the PT/LC provides a simple and reliable sealed connection. Factory terminated PT/LC plug assemblies, in various lengths, can be provided as jumpers to connect with most any industry standard optical connectors, allowing hassle free integration with existing hardware. The PT/LC receptacle accepts standard simplex or duplex LC assemblies to provide cost effective connections to active devices or patching with LC pigtails or jumpers. The PT/LC is capable of performing in the toughest environments and is exceptionally suited for WiMax, LTE, 3G/4G/5G wireless, small cell and base station applications. Many available receptacle mounting configurations and cable types allow installation into almost any system or application.
    More
  • PT-MPO Cable Assembly
    PT-MPO Cable Assembly
    Amphenol harsh environment PT-MPO plug assemblies and mating receptacles leverage the proven MIL-DTL-26482 spec connector system to provide an environmental seal and mechanical protection for 4 to 24 fiber MPO style connections. The PT-MPO metal bayonet connector system is quick to deploy, requiring only ¼ turn. It is a metal construction and has a positive latching system (both audible and visual). Factory-terminated PT-MPO plug assemblies are available in lengths starting from 1 meter and can be provided as jumpers with breakouts to connect with most industry standard optical connectors, allowing hassle-free integration. The PT-MPO receptacle accepts industry standard MPO patch cables to be used inside the enclosure, allowing simple connection to QSFP devices, or can be used with a breakout cable for discrete single fiber or SFP connections. Amphenol’s PT-MPO connectors are exceptionally suited for WiMax, LTE, and other applications requiring more than 2 fibers. The PT-MPO is capable of performing in even the toughest environments.
    More
  • R2CT Housing
    R2CT Housing
    The R2CT field installable IP67 weatherproof housing is designed as a cost effective means of providing a removable interface for applications requiring protection from wet or dirty environments. It allows for quick and easy installation onto Optical LC, RJ45, or other outdoor communication assembly styles. The system can be field assembled over previously deployed assemblies or provided on factory terminated assemblies for quick and reliable deployments. The R2CT allows direct mating to edge mounted active devices or as a sealed feed-thru to adapters or internally mounted devices. The R2CT gland is also suitable for use as a feed-through interface for other type signal and fiber applications. Amphenol’s R2CT Field Installable cable glands are exceptionally suited for wireless base station applications.
    More
  • Singlemode Cable Assemblies
    Singlemode Cable Assemblies
    Amphenol is a premier manufacturer of singlemode patch cords in the telecommunications industry, meeting or exceeding many of the industry standard requirements for optical transmission loss, reflectance, visual endface specifications, and geometry.
    More
  • ST Connectors and Cable Assemblies
    ST Connectors and Cable Assemblies
    Amphenol’s ST and STII connectors utilize a bayonet style mating concept to provide a secure, robust coupling mechanism. The enclosed spiral slotted coupling nut allows easy insertion in densely packed patch panels. The ST connector has been used extensively in telecom, data premise installation, and test lab applications. Special attention has been given to every ST performance parameter, increasing product repeatability and exceeding industry standards. The ST connector is available with a plastic or die cast body with a ceramic or stainless steel ferrule. Amphenol’s ST and STII connectors utilize a bayonet style mating concept to provide a secure, robust coupling mechanism. The enclosed spiral slotted coupling nut allows easy insertion in densely packed patch panels. The ST connector has been used extensively in telecom, data premise installation, and test lab applications. Special attention has been given to every ST performance parameter, increasing product repeatability and exceeding industry standards.
    More
  • TxRx Cable Assembly
    TxRx Cable Assembly
    Amphenol's TxRx Harsh Environment Interconnect system is designed to provide an outdoor LC-based sealed connection to a board mounted SFP or RJ45 device within a sealed enclosure. The system is designed to provide IP67 dust and water protection when connector and receptacle are mated or with dust caps installed. Plug cap includes integrated pulling eye for easy installation. Amphenol’s TxRx assemblies are exceptionally suited for WiMax, LTE, wireless, wireless backhaul and base station applications.
    More
  • 1.2mm Cable Assemblies
    1.2mm Cable Assemblies
    Amphenol’s 1.2mm fiber optic assemblies are ideally suited for network applications where space in the fiber management trays is limited. The 1.2mm diameter of the cable reduces congestion in trays and racks, allowing for better airflow. These assemblies are a perfect complement to High Density fiber management systems.
    More
  • LC Connectors and Cable Assemblies
    LC Connectors and Cable Assemblies
    Amphenol Fiber Optic Product's LC small form factor (SFF) connectors utilize the familiar RJ-45 latching mechanism. The LC provides great space savings in the network. With accelerated growth demanding greater bandwidth in less physical space, LC connectors have been established as the connector of choice for high density patch panels and installations.
    More
  • LC-X Flippable Cable Assembly
    LC-X Flippable Cable Assembly
    Amphenol’s LC-X flippable Uniboot connector simplifies cable routing in high density panels. The compact design allows for greater density as well as the convenience of reversing the polarity. Amphenol Uniboot LC-X flippable assemblies reduce congestion in racks and trays due to the one boot, one cable design that replaces the need for stocking two connectors of opposing polarities. With the new flippable technology, the polarity of the connector can be changed quickly without the use of special tools. In addition to this, the pitch can easily be changed from standard (6. 25mm) to mini (5. 25mm).
    More
  • FC Connectors and Cable Assemblies
    FC Connectors and Cable Assemblies
    Amphenol’s FC connectors effectively terminate optical fiber in a variety of network applications. The connector is secured using a threaded coupling nut, providing a significant increase in pull-out performance. The FC connector also features an internal cavity and epoxy injection tube that virtually eliminates the possibility of improper epoxy application, thus providing higher manufacturing yields.
    More
  • MPO Connectors and Cable Assemblies
    MPO Connectors and Cable Assemblies
    Amphenol Fiber Optic Products manufactures a comprehensive line of MPO connectors and cable assemblies that provide high density connections for the expanding datacom market space.
    More
  • Multimode Cable Assemblies
    Multimode Cable Assemblies
    Amphenol is a premier manufacturer of Multimode patch cords in the telecommunications industry, meeting or exceeding many of the industry standard requirements for optical transmission loss, reflectance, visual endface specifications, and geometry.
    More
  • Outdoor Enclosures
    Outdoor Enclosures
    Amphenol’s Fiber Demarcation Boxes offer superior protection for indoor or outdoor equipment installations. These sealed polymer enclosures provide a long life, weather resistant location to demarcate, combine, or segregate optical signal fibers for connection to various communication equipment, including backhaul, macro and small cell wireless applications. Enclosures are tailored with internal or external patching, splicing and/or distribution options to meet existing requirements and provision for future expansion.
    Entrance and exit ports can be configured to include pigtails, flexible port covers, sealing cable glands or pluggable receptacles for optical fiber cables. Provided with integrated mounting features, the enclosures are designed for easy installation in any location and environment, ideal for wall and pole mount applications.
    More
  • SC Connectors and Cable Assemblies
    SC Connectors and Cable Assemblies
    Amphenol Fiber Optic Product's premier high-performance fiber optic SC connector utilizes a push/pull retention feature enabling easy insertion and removal, making it ideally suited for standard applications. The SC connector features an internal cavity and epoxy injection tube that virtually eliminates the possibility of improper epoxy application, thus providing higher manufacturing yields and superior quality.
    More
Contact Form
Send