Products

B2B & B2W & W2W Connectors Filtre

B2B & B2W & W2W Connectors

  • SSL

    SSL

    More
  • Amphenol ICC's new 1.2mm pitch wire to board connectors are low profile (mated height of 2.50mm) and compact with pin count availability for 3, 4 and 6 pin counts. The plug and receptacle uses a frictional mating method to provide the retaining function to enable up to 20 mating cycles. The low profile and compact design of the connector gives its advantage in applications where space is tight and the enclosed receptacle profile make sure that the side entry matings are easy in tight spaces. The additional polarized key slots prevent any misalignment issues between the plug and receptacle.
    More
  • Amphenol ICC's 1.25mm pitch wire-to-board connector series is designed for a wide variety of applications in Industrial, Automotive and Consumer markets. The range consists of terminals, crimp housings and PCB headers in straight and right angle, surface mount and through mount configurations. It is a single row design, available with from 2 to 15 circuits. A crimping application tool is also available for wire harness assembly. Unlike many other products for the same applications,
    More
  • FLEXIBLE SOLUTION FOR HIGH SPEED APPLICATIONS BergStak HS™ 0.50mm connector is a flexible solution designed for high speed and high density, parallel board-to-board applications with various heights in different sizes.
    More
  • BOARD-TO-BOARD SOLUTION FOR HIGH SPEED AND HIGH DENSITY APPLICATIONS BergStak+™ 0.80mm is designed to be the next generation PCIe 4. 0 compliant mezzanine connector system. It is fully compatible with the existing BergStak® 0.80mm product recommended by the Open Compute Project (OCP). Backward mateable and footprint compatible with existing BergStak® 0.80mm Available in 80 and 120 positions. Other position Available in 5, 8, 12 and 16mm stack heights
    More
  • 3-AXIS FLOATING FEATURE, SHIELDED DESIGN BergStak® 0.40mm is a floating type Board-to-Board (BTB) connector with 32 pin count and stack height of 5mm. This solution comes with an all-round shield for superior EMI performance. Its unique connector design has a floating range of ±0.40mm in the X, Y and Z directions. BergStak® 0.40 ideal for automotive applications, especially cameras mounted on vehicles. Fine pitch design at 0.40mm Supports speed performance up to 3Gb/s Floating range of ±0.40mm in the X, Y and Z directions Shielded design for superior EMI performance Polarized key for Poke-Yoke mating
    More
  • The BergStak® product range is expanded to include 0.5mm mezzanine connectors. Available in 3mm to 6mm stack height options in 0.5mm increments, this connector is also offered in 10 to 60 positions in 10 position increments. Designed with scoop-proof housing, the terminals are protected from damage when parts are mated. BergStak® 0.5mm mezzanine connector comes with two options: Metal hold-down option ensures higher retention force; Locating pegs option eases manual assembly. Both options can be configured within a single connector. BergStak® 0.5mm mezzanine connector is a comprehensive and versatile solution. The 0.5mm double row contact pitch feature saves space on PCB and is highly suitable for high density applications in consumer and industrial markets.
    More
  • FLEXIBLE SOLUTION FOR HIGH DENSITY APPLICATIONS Amphenol ICC's BergStak® 0.8mm is a flexible solution designed for high speed and high density, parallel board-to-board connector system with 16 PCB stack heights in 9 sizes up to 200 positions. Housing and terminal profile guarantees support of up to 12Gb/s Vertical versus vertical mating configuration 40 to 200 position sizes in 20 position increments 5mm to 20mm stack heights in 1mm increments
    More
  • BergStik® 2.54mm unshrouded headers are available in surface-mount (SMT), through-hole (THT), press-fit, stacking and pin-in-paste (PIP) versions. Designed in single and double row, they are available in straight or right angle options, from 2 to 72 positions. Featuring a "breakaway" design, each connector can be cut or broken to length to suit the application profile. The maximum current rating is 3A per contact. This product range is extended with BergStik® 2.54mm unshrouded vertical headers in 0.25μm plating, available in standard sizes. It offers an economical solution for various applications. It is also specified up to 100 mating cycles. BergStik® product range provides Board-to-Board, Wire to-Board and Cable-to-Board interconnect solutions for all electronic equipment and devices.
    More
  • SECURE, HIGH SPEED DESIGN FOR HARSH ENVIRONMENTS Amphenol ICC's Conan® 1.00mm is a mezzanine connector designed for industrial applications and harsh environments. Its unique design with an audible 'click' sound enhances the security and ease of use.

    New RA configuration in 4 pin counts
    RA has compact size of 8.5mm depth and 5.3mm height on PCB after mating
    Enables perpendicular stacking application
    More
  • Robust 0.5mm fine pitch mezzanine connector suitable for a wide range of high reliability applications and demanding environments. Innovative hermaphroditic design provides a precise mating interface with extra housing guidance. Reduced product mix simplifies customer connector qualification, documentation and maintenance. Two versions offer a choice between supplemental PCB hold-downs and pegs for short overall length.
    More
  • COMPACT, ROBUST VERSATILE CONNECTOR SYSTEM Minitek MicroSpace™ 1.27/1.5mm Crimp-to-Wire compact design addresses the growing demand for miniaturizing components. The connector is capable of reducing PCB footprint by 50% due to the increase in connector density. LV214 Severity-2 compatible ensures high vibration Endurance, primary and secondary contact retention 65N connector locking strength Poka Yoke Polarization to prevent visual mismatching
    More
  • COMPACT, ROBUST VERSATILE CONNECTOR SYSTEM Minitek MicroSpace™ 1.27/1.5mm Crimp-to-Wire compact design addresses the growing demand for miniaturizing components. The connector is capable of reducing PCB footprint by 50% due to the increase in connector density. LV214 Severity-2 compatible ensures high vibration Endurance, primary and secondary contact retention 65N connector locking strength Poka Yoke Polarization to prevent visual mismatching
    More
  • Minitek® is Amphenol ICC's brand for board to board and wire/cable to board connectors in 2.00mm pitch. It is a fully modular system enabling all types of connections between PCBs, wires and flat cables. Its 2mm spacing allows up to 38% space saving compared to traditional modular systems Vertical and horizontal configurations Single and double row 2 to 25 positions per row Eject latch and active latch feature Modular system ensures all is intermatable Dual beam contact design ensures reliable connection
    More
  • ROBUST, VERSATILE AND HIGH CURRENT PERFORMANCE Minitek® Pwr 4. 2 High Current Connector (HCC) is designed for power applications with current rating up to 13.5A per contact and wire gauge range from 20 to 16AWG for Wire-to-Wire and Wire-to-Board applications. It is available in 2 to 24 circuits for dual row and 3 to 5 circuits for single row.
    More
  • ROBUST, VERSATILE AND HIGH CURRENT PERFORMANCE Minitek® Pwr 3.0 High Current Connector (HCC) is designed for power applications with current rating up to 12A per contact and wire gauge range from 20 to 16AWG for Wire-to-Wire and Wire-to-Board applications. It is available in 2 to 24 circuits for dual row.
    More
  • Minitek® Pwr Hybrid 4. 2 connectors are designed for power and signal application with current rating up to 9A per circuit, available for dual row and 2 to 24 power circuits, and 2 to 12 signal for Wire-to-Board application. Crimp, snap-in receptacle contacts are used to terminate AWG 16-30 wires. Receptacle housings allow Wire to-Board configurations. Crimping and removal tools are available for wire harness assembly. Board mounted vertical headers support Wire-to-Board interconnections. Wave soldering headers are available in through-hole configuration.
    More
  • Minitek® Pwr Hybrid 3.0 connectors are designed for power and signal application with current rating up to 5A per circuit, available for dual row and 2 to 24 power circuits, and 2 to 12 signal for Wire-to-Board application. Crimp, snap-in receptacle contacts are used to terminate AWG 20-30 wires. Receptacle housings allow Wire-to-Board configurations. Crimping and removal tools are available for wire harness assembly. Board mounted vertical header supports Wire-to-Board interconnections. Wave soldering headers are available in through-hole configuration.
    More
  • Minitek127® is an extensive modular range of connectors for all types of wire to board and cable to board applications. It includes straight and right angle, surface mount and through mount, pin headers and board receptacles in different plating variations and position numbers up to 100. The product line also include IDC version.
    More
  • LOW PROFILE AND COMPACT HFMK Series FPC is a 0.21mm pitch Non-ZIF FPC that is lowest in height suitable for applications where space is a constraint. Low profile and compact FPC locking arm Single action Push-pull FPC termination
    More
  • Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Amphenol ICC offers a full range of 0.3mm pitch connectors for applications where board space is at premium. Amphenol ICC’s 0.3mm pitch connectors are available in 13 to 51 positions.
    More
  • Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. The SFGL series 0.4mm pitch connector offers a high pin count with a small footprint and includes such innovative
    More
  • Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on their way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuator that allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Amphenol ICC has one of the broadest ranges of 0.5mm flex circuit connectors in the industry.
    More
  • Amphenol ICC, a leader in flex circuit connectors offers the most innovative and complete range of products in the industry. Amphenol ICC offers products in LIF (low insertion force) and ZIF (zero insertion force), top and bottom contact options, vertical and right angle orientations, surface mount and through hole terminations in contact spacing options all the way down to 0.2mm with finer pitch products on the way. Additional features, such as optional cable locks and additional mounting devices, insure that Amphenol ICC has a solution for almost any application, no matter how demanding. As your connection to innovation, Amphenol ICC continues to bring you unique solutions that not only give you the footprint you need but help to maximize the quality level of your application. Many of our flex circuit connectors offer ZIF with prehold, which applies a small retention force on the cable to hold it in place until the actuator is locked. Amphenol ICC introduced the first flex connector with a back side flip actuatorthat allows the user to insert the flex cable and lock the actuator with one hand. Amphenol ICC improved that feature on many products by modifying the connector housing to provide visual confirmation that the flex cable is mated properly. Amphenol ICC was also the company that first brought you the option of an FFC/FPC connector under 1mm in height. These features combine to insure your application has the highest quality possible when it leaves your site. Utilizing 1.00mm contact spacing has become an economical way to circuit connectors in the industry to terminate displays as well as make difficult board to board connections.
    More
  • RELIABLE CONNECTION AND EASE OF INSTALLATION FOR WIRE-TO-BOARD TERMINATIONS

    Amphenol ICC's Gripet® Miniature IDC Connector offers a robust solution for miniature IDC Wire-To-Board connections. Each connector comes in 5mm pitch, has a 3.80mm profile and 4mm width. Its low profile and compact design makes Griplet® an ideal connector where space is tight and ease of installation is important.

    Four points of wire contact plus strain relief ensures highly reliable connection
    Wire applied and insultated directly to a PCB to maximise cost effeciency
    Multiple wire sizes from 30 to 20 AWG
    More
  • HIGHLY RELIABLE, FIELD INSTALLABLE AND COMPACT I/O SOLUTION

    Industrial Mini I/O is a compact wire-to-board interface which is field installable in virtually any environment.
    Field installable plug kit
    One quarter the size of a conventional RJ45
    Highly reliable connection with 2 points of contact per line
    Two unique interfaces to prevent mismating
    Unique locking feature with high cable retention force within the metal housing, resulting in minimal space required
    More
  • The innovative PV® crimp-to-wire system connects discrete wire to printed circuit boards. High reliability dual-metal receptacle terminals plug to industry standard 0.025 inch (0.635mm) square posts. A variety of containment, protection and guidance options are available for both sides of the connector interface.

    Wire side- PV® receptacle terminals can be terminated to wire and used discretely or inserted to multiple-circuit, MINI-LATCH connector housings that include optional polarizing keys.

    Printed Circuit side- Shrouded multiple-post, headers include an integral friction feature that grips the sides of the mating MINI-LATCH housings and reduces the risk of disengagement. Other Amphenol ICC header options include discrete staked pins or BergStik® un-shrouded headers.
    More
  • PRECISE AND DURABLE IDC CONNECTION WITH DUPLEX PLATING AND DUAL POLARIZATION

    Amphenol ICC's Quickie® is a complete solution for flat cable-to-board connections using 2.54mm pitch IDC technology. The highly durable and cost-saving connectors come with specialized features in polarization, plating, and structure. Headers are low profile and come in shrouded versions with or without eject latches. Receptacles have strain relief covers for precise alignment.

    Dual polarization feature prevents connector mismatch
    Duplex plating saves cost and guarantees 100+ mating cycle performance
    IDC headers have four walled shielding for pin protection and misalignment prevention
    Pre-loaded adjustable bridge-type cover on receptacles shortens assembly time and protects contacts
    Pin-in-paste versions and direct IDC-to-board one-piece solutions are available
    More
  • Rib-Cage® connectors provide optimal precision and reliability at a competitive commercial cost.

    Rib-Cage® connectors meet high performance standards for use in applications with shock and vibration.

    The versatile Rib-Cage® system includes dual-row, pinand-socket connectors for right-angle and mezzanine connections between printed circuit boards (PCB) or flexible printed circuits (FPC).
    More
  • Amphenol ICC extends the RotaConnect® range with a Wire-to-Board (WTB) solution. The WTB connector mates horizontally with the existing RotaConnect® Board-to-Board (BTB) version, which is hermaphroditic and surface mount soldered to the PCB.

    The RotaConnect® WTB is a 3.00mm pitch connector. It features a dual beam spring contact design, delivering high-performance and reliability. The connector features a passive latch for housing retention which protects pins and prevents mismatching. Housings are available in 2 and 4 positions.

    RotaConnect® WTB provides power to the LED printed circuit board in a string of rigid printed circuit board light strips. The contacts accept stranded copper wire with wire ranges from 30AWG to 22 AWG and the maximum current rated is up to 5A. The operating voltage is 125 VAC and temperature range of -40°C up to +125°C.

    RotaConnect® WTB is RoHS compliant and is ideal for applications in the industrial market.
    More
Contact Form