Amphenol is the world leader in the design, manufacture, and supply of high-performance interconnect systems for military and commercial aerospace harsh environment applications. Amphenol provides an unparalleled product breadth, from military specification connectors to customized high-speed board level interconnects; from flexible to rigid printed circuit boards; from backplane systems to completely integrated assemblies. Key markets supported are avionics, radar, communications, ordnance, missiles, engines, ground vehicles and tanks, space, and all levels of aviation. Amphenol is a technology innovator that designs to meet customers’ needs from program inception.
50 MHz to 1.5 GHz. Omnis, yagis, panels and stacked dipole arrays for Private Mobile Radio (PMR), Land Mobile Radio (LMR) and Terrestrial Trunked Radio (TETRA).
Amphenol’s colinear antennas are designed for deployment in VHF, UHF and SHF networks. A wide variety of options are available including gain, tilt, lightening protection and designs that have low passive intermodulation to minimize network interference. Antennas are housed inside a high-strength glass fibre shroud and manufactured to the highest quality standard, ensuring long term, reliable operation.
• Colinear Antennas
• Centre-fed Dipole Antennas
• End-fed Dipole Array Antennas
• Ground Plane Antennas
• Miscellaneous Antennas
Amphenol’s DAS, in-building and microcell antennas have been deployed by network operators worldwide to provide improved coverage in office buildings, campuses, tunnels and urban canyons. Our aesthetically pleasing, low profile designs are available in an assortment of directional and omnidirectional configurations giving network engineers the tools needed to optimize coverage in these difficult environments. Innovative wide band, dual band and tri band configurations are available allowing one distributed antenna system to serve multiple service providers with minimum visual impact.
• Directional Antennas
• Omnidirectional Antennas
• Phasing Harnesses
• Mounting Hardware
Amphenol C&S Antennas manufactures HF wire antennas for short, medium and long range communications. The antennas are designed for tactical, emergency and fast-reaction situations. Wires are Kevlar cored, copper braided and pvc coated with a no-kink feature. They are numbered for accurate set-up and are designed for the military environment with the solider in mind.
The SOF230 antenna was designed specifically for the US Special Operations Forces for use in any environment that they may encounter. The SF230 antenna system has fifteen configurations including NVIS, Omnidirectional and Directional that cover short, medium and long range. The kit includes a counterpoise for use when poor ground conditions exist due to dry soil, such as desert conditions. The kit contains a 1:1 and 6:1 BALUN and terminating resistors that allow a broadband antenna to be erected if a tuner or coupler is not used or damaged in the field. All components are built to meet MIL-STD 810G and are extremely durable and long lasting.
The LFH-230 FANLITE™ antenna is a lightweight, transportable HF wire antenna intended for omnidirectional skywave communications to a range of about 2,000 miles, including short-range Near Vertical Incidence Skywave (NVIS) operation. Supplied in a rapidly assembled kit form, the antenna is designed for use with C&S Antennas’ telescopic CARRYMAST™. When erected on one of these masts, the LFH-230 FANLITE™ may be set-up by two people in less than 25 minutes.
The Longshot™ is a lightweight, transportable HF wire antenna intended primarily for long-range skywave communications. Supplied in a rapidly assembled kit form, the antenna may be erected in a variety of long wire configurations (including a low profile, jam-resistant mode) to meet contingency. The Longshot™ has a 500 Foot Sloping Vee – Long-Range, Transmit/ Receive.
The Multilite™ Tactical Antenna system or MTA is a key element in a communication system since its deployment can be controlled by the operator to suit all operational requirements. It is comprised of seven separate antennas for seven roles:
1. Horizontal dipole – omnidirectional at short or medium-range, broadside at long-range
2. Sloping dipole – omnidirectional for short/medium-range
3. Bent dipole – low frequency ground wave
4. Inverted L – low frequency ground waves
5. Base Feed Vertical – omnidirectional for ground and long-distance skywave
6. Sloping V – directional medium-range
7. Inverted V – inverted V long-range directional
CARRYMAST™ "CARRYMAST™ is a range of lightweight, man-portable carbon fiber masts available in 9m (30 ft), 10m (34 ft), 12m (38 ft) and 15m (50 ft) standard heights. These lightweight masts are designed to be carried by one person and can be erected in the field in minutes, even under severe weather conditions. CARRYMAST™ was designed to support C&S Antennas’ range of Tactical HF Antennas Systems. An assortment of adapters and accessories are available to support UHF, VHF and microwave antennas as well.
• Rapid deployment, simple operation
• Low weight
• One or two man setup
• Robust and reliable, proven in action
• No pumps or winches necessary
• Compact stowed size
• Low radar cross-section
• Ice resistant
• MIL-STD 810C and NSN listed
• Multi-antenna capable
• Ground, hardstand or vehicle
CARRYMAST™ Accessories "Quoted performance parameters are provided to offer typical or range values only and may vary as a result of normal manufacturing and operational conditions. Extreme operational conditions and/or stress on structural supports is beyond our control. Such conditions may result in damage to this product. Improvements to product may be made without notice.
3.2.1 Integral Tripod
• Used for temporary roof mounting
• Folds along mast body
3.2.2 T-Bar Adaptor
• Enables two antennas to be mounted at mast head simultaneously
• Straps to mast body for transportation
3.2.3 Tilter / Positioner
• Used to provide boresight stabilization and elevation tilt of narrowbeam antennas
3.2.4 Half-Way Up Adaptor
• Side mounting for antenna